43012 Debris Removal DEB: The debris hose is disconnected Japanese_Newspaper_OEM_Engine Lotem_Quantum Magnus_400 Magnus_800 Magnus_VLF Thermoflex Trendsetter_400/800 Trendsetter_NEWS Trendsetter_Series_4 The flexible hose connecting the debris collection nozzle inside the output device and the UDRC is disconnected somewhere. First check that the external portion of the hose is connected. If it is, then open the top of the output device and check that the internal portion of the hose is connected. If you are unable to resolve the problem, contact your local Customer Service Representative. This error is reported. Cause 1: The debris hose is disconnected. Solution: -Check all debris hose connections between UDRC and nozzle. Reattach if necessary. -Check for large holes in the debris hose. Replace as necessary. Cause 2: The nozzle sensor tube to the nozzle pressure sensor (in the output device) is not attached or has a hole/kink. Solution: Reconnect or replace the sensor tube making sure that it is connected to "LOW" port on the Setra brand sensor. 07-Jul-2001 ..\..\ShowAllErrors.htmFirmware 1 Error Index ..\..\ShowAllCommands.htmFirmware 1 Command Index ..\..\ShowAllParameters.htmFirmware 1 Parameter Index Updated: Thu Jul 17 07:23:36 2008 PST